DCI OpenStack Agent Advanced

How to set HTTP Proxy for my dci-openstack-agent

If you need to go through a HTTP proxy, you will need to set the http_proxy environment variables. Edit the /etc/dci-openstack-agent/dcirc.sh file and add the following lines:

export http_proxy
export https_proxy
export no_proxy

And replace by the ip address of the remoteci. This should be the same value as the dci_base_ip variable used in the settings.yml file if customized (default to ansible_default_ipv4.address fact in group_vars/all).

You will need to configure yum, so it will make use of the HTTP proxy. For instance, add proxy=http://somewhere:3128 in the [main] section of /etc/yum.conf.

Finally, RHSM also needs to be able to go through the proxy. Edit /etc/rhsm/rhsm.conf:

proxy_hostname = somewhere
proxy_port = 3128
proxy_user =
proxy_password =

How to deal with multiple OpenStack releases

When testing multiple OpenStack releases you probably have different steps (configuration, tasks, packages, etc...) according to the release. As an example you could:

  • have scripts per OpenStack versions and file path based on the dci_topic variable (ie OSP10, OSP11, etc..):
- shell: |
    /automation_path/{{ dci_topic }}/undercloud_installation.sh
  • have git branch per OpenStack versions based on the dci_topic variable :
- git:
    repo: https://repo_url/path/to/automation.git
    dest: /automation_path
    version: '{{ dci_topic }}'

- shell: /automation_path/undercloud_installation.sh
  • use ansible condition and jinja template with the dci_topic variable :
- shell: |
  when: dci_topic in ['OSP12', 'OSP13']

- shell: >
    source /home/stack/stackrc &&
    openstack overcloud deploy --templates
    {% if dci_topic in ['OSP12', 'OSP13'] %}
    -e /usr/share/openstack-tripleo-heat-templates/environments/docker.yaml
    -e /usr/share/openstack-tripleo-heat-templates/environments/docker-ha.yaml
    {% endif %}
    -e /usr/share/openstack-tripleo-heat-templates/environments/disable-telemetry.yaml

How to retrieve the OpenStack yum repository

During the 'new' hook, the remoteci will create a yum repository with the latest bits available. This repository is located in the /var/www/html/dci_repo directory and accessible via HTTP at http://$remoteci_ip/dci_repo/dci_repo.repo.

There's several ways to retrieve the yum repository from the undercloud:

  • Using the yum-config-manager command:
- shell: |
    yum-config-manager --add-repo {{ dci_baseurl }}/dci_repo/dci_repo.repo
  become: true
  • Using the http url:
- get_url:
    url: '{{ dci_baseurl }}/dci_repo/dci_repo.repo'
    dest: /etc/yum.repos.d/dci_repo.repo
  become: true
  • Using the ansible copy module:
- copy:
    src: /var/www/html/dci_repo/dci_repo.repo
    dest: /etc/yum.repos.d/dci_repo.repo
  become: true

How to test a specific repository for an OpenStack release

The agent's default behaviour is to fetch and test the latest available component (repository + container images) for the configured topic.

To fetch and test another component, you must define the dci_components ansible parameter when executing the agent.

This can be done either:

  • in the configuration file (default: /etc/dci-openstack-agent/settings.yml) by adding:
- dci_components:
    - <component_id>
  • or on the command-line by adding -e dci_components=<component_id>:
$ ansible-playbook -vv download_only.yml -e @/etc/dci-openstack-agent/settings.yml -e dci_components=<component_id>

The component_id is available:

  • in the web GUI in "Components" by clicking on the notepad icon on the left of the component name ;

  • using the dcictl cli, for OSP13 for example:

$ source /etc/dci-openstack-agent/dcirc.sh
$ TOPIC=$(dcictl topic-list | awk '/OSP13/ { print $2 }')
$ dcictl component-list --topic-id=${TOPIC}
|                  id                  |            name            | state  | canonical_project_name |…
| 8d0885d6-8cde-433c-9053-c6aca7845920 | RH7-RHOS-13.0 2019-03-18.1 | active |     RH7-RHOS-13.0      |…
| bb2de6d2-89e9-4294-bdd6-f656bea2d566 | RH7-RHOS-13.0 2019-03-08.1 | active |     RH7-RHOS-13.0      |…
| 18cb361e-49b6-49eb-9150-d207250a003d | RH7-RHOS-13.0 2019-03-04.2 | active |     RH7-RHOS-13.0      |…
| 1d1e0dcc-9ec5-4308-aad0-b4c8d4cbfa8d | RH7-RHOS-13.0 2019-03-01.1 | active |     RH7-RHOS-13.0      |…
| 0c7e51ec-2492-4570-983e-7d620f96499f | RH7-RHOS-13.0 2019-01-22.1 | active |     RH7-RHOS-13.0      |…
| 16b9f539-d3c2-42d1-bd63-d32ddbcef76b | RH7-RHOS-13.0 2019-01-21.1 | active |     RH7-RHOS-13.0      |…
| d2eb5f90-807a-42f5-aae5-e0bbf0e1edba | RH7-RHOS-13.0 2019-01-10.1 | active |     RH7-RHOS-13.0      |…
| 37b814ed-3423-4371-84bf-a0566ee8cfc9 | RH7-RHOS-13.0 2019-01-03.2 | active |     RH7-RHOS-13.0      |…
| 487fc160-d1bc-4a43-819b-979fd8655164 | RH7-RHOS-13.0 2018-12-13.4 | active |     RH7-RHOS-13.0      |…

How to fetch and use the images

If you are using OSP12 and above, the DCI agent will set up an image registry and fetch the last OSP images on your remoteci.

Before you start the overcloud deploy with the openstack overcloud deploy --templates [additional parameters] command, you have to call the following command on the undercloud node:

$ openstack overcloud container image prepare --namespace ${remoteci_ip}:5000/rhosp12 --output-env-file ~/docker_registry.yaml

:information_source: ${remoteci_ip} is the IP address of the remoteci machine and in this example we assume you use OSP12.

You don't have to do any additional openstack overcloud container call unless you want to rebuild or patch an image.

The Overcloud deployment is standard, you just have to include the two following extra Heat template:

  • /usr/share/openstack-tripleo-heat-templates/environments/docker.yaml
  • ~/docker_registry.yaml

See the upstream documentation if you need more details: Deploying the containerized Overcloud

Starting with OSP14 (Rocky), the undercloud is now also containerized. That means that you also need to generate the container image list before the undercloud installation.

$ openstack overcloud container image prepare --namespace ${remoteci_ip}:5000/rhosp14
                                              --roles-file /usr/share/openstack-tripleo-heat-templates/roles_data_undercloud.yaml
                                              --output-env-file ~/docker_registry.yaml

Finally specify the generated file path in the undercloud configuration and add the remoteci ip in the list of the docker insecure registries:

$ vim undercloud.conf
container_images_file = /home/stack/docker_registry.yaml
docker_insecure_registries = ${remoteci_ip}:5000

How to skip downloading some container images

Each Openstack release comes with +100 container images. In most of the cases you don't need all the images to do the deployment because some are specific to extra services (barbican, manila, sahara, etc...) If you want to skip downloading some images, you need to add the list of the associated openstack services in the settings.yaml file.

  - barbican
  - manila
  - sahara
  - swift

How to run the Update and Upgrade

After the deployment of the OpenStack, the agent will look for an update or an upgrade playbook. If the playbook exists it will run it in order to upgrade the installation.

The agent expects the upgrade playbook to have the following naming convention:


In this example, OSP9 is the current version and OSP10 is the version to upgrade to. Here is an example of an update playbook:


During the upgrade, you may need to use a specific version of a repository. Each component has its own .repo. They are located in http://$remoteci_ip/dci_repo/, for instance: http://$remoteci_ip/dci_repo/dci_repo_RH7-RHOS-11.0.repo.

How to run my own set of tests ?

dci-openstack-agent ships with a pre-defined set of tests that will be run. It is however possible for anyone, in addition of the pre-defined tests, to run their own set of tests.

In order to do so, a user needs to drop the tasks to run in /etc/dci-openstack-agent/hooks/local_tests.yml.

NOTE: Tasks run in this playbook will be run from the undercloud node. To have an improved user-experience in the DCI web application, the suite should ideally returns JUnit formatted results. If not in JUnit, one will be able to download the results but not see them in the web interface directly.

How to adjust the timer configuration

# systemctl edit --full dci-openstack-agent.timer

You have to edit the value of the OnUnitActiveSec key. According to systemd documentation:

OnUnitActiveSec= defines a timer relative to when the unit the timer is activating was last activated.
OnUnitInactiveSec= defines a timer relative to when the unit the timer is activating was last deactivated.

DCI comes with a default value of 1h, you can increase to 12h for example.

Tempest: How to select the Tempest tests to execute

The agent runs by default the Tempest "smoke" tests only. This should be sufficient to verify that the deployment is working without taking too long to run or have false negatives due to deployment specifics.

In the tempest configuration you can specify a regular expression against which each test will be matched before being executed.

The test_white_regex allows to filter the tests executed. For example, set it to an empty string to run all of the Tempest tests:

$ vim /etc/dci-openstack-agent/settings.yml
test_white_regex: ""

Another option is to skip some specific tests using a blacklist:

  - tempest.api.image.v2.test_images_metadefs_namespace_properties.MetadataNamespacePropertiesTest.test_basic_meta_def_namespace_property

NOTE: Both test_white_regex and test_black_regex can be used at the same time.

Tempest: How to disable services

The agent installs by default the meta tempest package openstack-tempest-all which contains all the tempest plugin tests. If you run tempest with the default configuration, you will execute tests on services that you probably don't want because the service isn't install.

In the tempest configuration you can disable tests per service. Each service has a boolean entry under the service_available section (now moved to each individual plugin).

You can use the tempest_extra_config variable in the settings.yml file to add some services to disable (the following example disables tempest tests for all services which may not be deployed by default, as of OSP 16):

$ vim /etc/dci-openstack-agent/settings.yml

  service_available.aodh: False
  service_available.ceilometer: False
  service_available.panko: False
  service_available.barbican: False
  service_available.designate: False
  service_available.gnocchi: False
  service_available.ironic: False
  service_available.kuryr: False
  service_available.load_balancer: False
  service_available.manilla: False
  service_available.mistral: False
  service_available.novajoin: False
  service_available.sahara: False
  service_available.zaqar: False

WARNING: if you want to override any of the tempest_extra_config dictionnary, you also need to recopy the default values from /usr/share/dci-openstack-agent/group_vars/all.

Tempest: How to customize services

Depending on the drivers (cinder, manila, neutron, etc...) you are using, you will probably need to adapt the tempest configuration for specific tests. You can enable/disable features per OpenStack services. Every service has a section with the suffix '-feature-enabled' that allows to enable or disable features. If your cinder driver doesn't support cinder backup and you don't deploy the service, then you can disable the feature to avoid tempest failures.

$ vim /etc/dci-openstack-agent/settings.yml

  volume-feature-enabled.backup: False

You can also do specific configuration per OpenStack services. For instance, the cinder volume type tests are using the storage_protocol ('iSCSI') and vendor_name ('Open Source') fields that are configured by the storage driver. The default values in tempest don't match those in all storage drivers that's why you need to adapt the tempest configuration per services if you don't want some false positive. As an example, if you're using Ceph as a cinder backend you will need to update those values like:

$ vim /etc/dci-openstack-agent/settings.yml

  volume.storage_protocol: 'ceph'

You will have some k/v with the 'network' prefix for neutron, 'compute' prefix for nova, etc... You can find most of the tempest config items in the tempest project config

WARNING: if you want to override any of the tempest_extra_config dictionnary, you also need to recopy the default values from /usr/share/dci-openstack-agent/group_vars/all.

Tempest: Run a given test manually

It may be useful to restart a failing test to troubleshoot the problem:

$ /home/stack/tempest
$ ostestr --regex tempest.api.network.test_ports.PortsIpV6TestJSON.test_update_port_with_security_group_and_extra_attributes

The Certification test-suite uses it's own configuration located at /etc/redhat-certification-openstack/tempest.conf. Is a copy of /home/stack/tempest/etc/tempest.conf.

How to test several versions of OpenStack

You can of course run different versions of OpenStack with the same remoteci. To do so, you need first to adjust the way systemd call the agent:

# systemctl edit --full dci-openstack-agent

Content :

Description=DCI Ansible Agent

ExecStart=-/usr/bin/ansible-playbook -vv /usr/share/dci-openstack-agent/dci-openstack-agent.yml -e @/etc/dci-openstack-agent/settings.yml -e dci_topic=OSP10
ExecStart=-/usr/bin/ansible-playbook -vv /usr/share/dci-openstack-agent/dci-openstack-agent.yml -e @/etc/dci-openstack-agent/settings.yml -e dci_topic=OSP11
ExecStart=-/usr/bin/ansible-playbook -vv /usr/share/dci-openstack-agent/dci-openstack-agent.yml -e @/etc/dci-openstack-agent/settings.yml -e dci_topic=OSP12


In this example, we do a run of OSP10, OSP11 and OSP12 everytime we start the agent.

How to manually run the hooks

You can prepare a minimal playbook like this one:

# cat run_hook.yml
- hosts: localhost
    - include_tasks: /etc/dci-openstack-agent/hooks/success.yml

Then call it using the ansible command:

# ansible-playbook run_hook.yml

The tasks will be run on the local machine and nothing will be sent to the DCI server.

Updating ansible roles

DCI OpenStack agent relies on Ansible roles that are maintained externally. When a role is updated upstream, the agent local copy in the roles directory needs to be synchronized. The fech-roles scripts is provided to ensure that the agents roles are refreshed. You will find it in the top-level directory of the dci-openstack-agent repository.

# fetch-roles

Sometimes, you will not be able to use vanilla repositories due to some patches that can't be merged for different reasons. Rather than forking, you should open a review in gerrit, leave it unmerged, and synchronize from the open review HEAD. The pros are you keep the full history of your patch, and can easily rebase when upstream role is updated.

results matching ""

    No results matching ""